Infinite Flight User Guide

We've put together a collection of help documents for Infinite Flight pilots, and ATC to help you get flying or controlling.


11.2 Editor Checklist

If help or guidance is needed before an airport is complete, Editors should utilize the #help Discord channel to ask specific questions related to their airport

11.2.1

Below is a checklist that editors should ensure is completed before marking an airport as complete and ready for review:

If you leave this page, items that you have "checked off" will not be remembered. Do not navigate away or refresh this page until you have completed the checklist (or particular section of the checklist such as "Taxiways")

Airport Properties

11.2.2

Airport Boundary

11.2.3

Airport Equipment

11.2.4

Pavements

11.2.5

  • All hangars must have a concrete pavement added underneath the hangar unless it is a different surface type (based on real life sources)

  • If there is a more performance efficient way (i.e. less nodes created) then this is acceptable (at the Reviewers discretion). E.g. snapping a pavement patch to the edge of the pavement rather than placing it on top, or allowing holes to be created underneath

Taxiways

11.2.6

  • Don't add centerline lights to stand lines unless specifically stated in available airport documents

Start Locations

11.2.7

Buildings and Facades

11.2.8

  • Any level that is not the top floor or the lowest layer of a floating building (such as a bridge) should have the roof type set to "none"

Objects

11.2.9

Airport Gates

11.2.10